Eppendorf InjectMan 4 Uživatelský manuál Strana 58

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 100
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 57
Operation
InjectMan
®
4
English (EN)
58
6.7.2 Moving to the position using the softkey
Prerequisites
At least one position is stored.
1. Press a softkey with a stored position.
You will move to the selected position.
The joystick is deactivated until the position has been reached.
The LEDs of the softkeys flash.
In the softkey status field a filled circle is displayed.
6.7.3 Moving to the position using the joystick key
Prerequisites
At least one position is stored.
•The Joystick key parameter must be set to the Switch position value.
6.7.4 Deleting a stored position
Prerequisites
A position is stored.
1. When the position has been reached, hold the softkey.
An acoustic signal will sound.
The position has been deleted.
The status field is empty
3. Move the capillary to the desired
position (e.g., parking position).
4. Press and hold the Pos 2 softkey for
approx. one second to store the parking
position of the capillary.
An acoustic signal will sound.
Pos 2 is marked.
The stored position is displayed in the
status field.
If a stored position is lower than the lower limit (Z-axis Limit), the position on the
Z-axis will only be approached up to the defined limit.
Press the joystick key.
You will move to the first position
Press the joystick key.
You will move to the next position.
Zobrazit stránku 57
1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 99 100

Komentáře k této Příručce

Žádné komentáře