Eppendorf InjectMan 4 Uživatelský manuál Strana 48

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 100
  • Tabulka s obsahem
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 47
Software
InjectMan
®
4
English (EN)
48
Application selection
Select the application
Store the main application
5.2.1 Application parameter
Predefined functions of the different applications.
Pos 1 – Save the X, Y and Z values of the capillary position. Switch the position using
the joystick key.
Pos 2 – Save the X, Y and Z values of the capillary position. Switch the position using
the joystick key.
Activate or deactivate the Step inject function.
Y off – Switch off the movement of the capillary in the Y-axis. Prevents moving
sideways during injection.
Z-axis Limit – Save the downward limit for the vertical capillary movement.
Axial – Switch on the capillary movement along the assembly bracket. Suitable for
straight capillaries.
Reduce or increase the Limit value for the limit.
•Execute the Clean function.
5.2.2 Application – Adherent cell injection
This application is suitable for injection into adherent cells.
Abb. 5-5:Application 1 Adherent cell injection
Fig. 5-5: Application 1 Adherent cell injection
Parameter selection
Joystick key – Inject
Freely program the softkey
Reduce the value for Z-axis Limit
Set the lower limit (Z-axis Limit)
Increase the value for Z-axis Limit
Execute the function
Zobrazit stránku 47
1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 99 100

Komentáře k této Příručce

Žádné komentáře